Visco Dens Plus
Heated Electronic Falling Ball Oil Viscosity Measuring Device
Oil Viscosity and Density Measuring Device “VISCO DENS PLUS”
Test Kit “VISCO DENS PLUS” incl. Accessories
Regular verification of viscosity of lubricating and hydraulic oils provides necessary reassurance that the performance of the engine system is stable and efficient. At the same time the determination of density enables more accurate measurement of viscosity. Therefore, the VISCO DENS PLUS helps to accurately assess both oil parameters in a single quick test procedure at three different temperatures (40 ˚C, 50 ˚C and 80 ˚C) directly on-site.
Technical Features
- Measuring range viscosity: 1 - 999 mm²/s
- Measuring range density: 0.82 - 1.05 g/ml
- Measuring temperature: 40°C, 50°C, 80°C
- Measuring time: about 15 min.
- Oil sample: approx. 200 ml
- Accuracy: +/- 3 %
Advantages
- Only one device to measure two important parameters
- No oil sample change for each test
- Three different temperatures applicable
- Four different hydrometers with automatically converted density value to 15 ˚C
Hydrometer for Density Measurement
First, density of the pre-heated oil sample is measured with the help of the relevant hydrometer. The density value is automatically converted to standard temperature of 15 ˚C. Based on the obtained density value and employing the falling ball principle, the viscosity value of the same oil sample can be determined. Two balls of different sizes can be used depending on the viscosity range and the corresponding temperature of the oil sample under examination.
At this point there should be a YouTube video, but you didn't accept the cookies to embed it!
reagents and spare parts:
Test Kit Cleaner, 300 ml
